Details:

These belts are designed to match our boots, but they can also just be if you like the stitched detail. The laminated belts feature beautiful stitching along the entire length of the belt, elevating it as a dressier option. The backing uses our Italian Belting leather. They come in either 2.5 or 3.2cm widths, with either brass or stainless hardware, with hand-stitched in roller or westend buckles.

Please be sure to read the fitting guide below as these belts are not exchangeable and are strictly made-to-order.

Fitting Guide:

Please visit our blog post to help guide you through calculating your belt size, it is NOT your pants size: https://wootten.com.au/how-to-calculate-your-belt-size/

To work out your size, please make sure the measurement is taken where and how you intend to wear your belt and you are NOT referencing the size of your pants. You can either take the measurement by threading a measuring tape through your pant loops. Otherwise some people find the simplest way is to measure off an existing belt that they wear. Go to the end of the buckle and take the measurement from just on the inside of this buckle end (to account for buckle hardware thickness differences) then measure to the hole you mostly wear it at. This measurement will then correlate to the measurement from the inside of the end of our buckle to the middle hole in our belt. Thus giving you some room to move if your pants sit higher, or lower, you wear more layers, or you gain or lose some weight over time. There are five holes in total on these belts.

Note as a guide, your belt measurement in inches is usually a few sizes larger than your pant size, so be sure to take this accurately as belts made-to-order cannot be returned for an incorrect measurement.

TIMEFRAME These belts can be finished to be completed with your boots, otherwise please allow up to 10 weeks for completion.

Size Guide